Tag Archives: clips

seattle japanese garden panorama

sink…sunk

no, i’m not trying to conjugate a verb…
about a month ago, i notice our under the counter mounted kitchen sink starting to separate from the counter. i figured we’d have a while before things would get serious, so i just let it be. Mary noticed the gap and I told her we’d have to do something about it.

i did some research and under mount sinks. when mounted correctly, there is silicone to fill the gap between the sink and countertop and then clips to hold the sink in place. the thing is many installer, like ours, leave off the clips. then, when 7-10 years go by, it’s way past any warranty and the sink drops.

i woke up to the hopes and expectation to watch the rose parade. instead, i woke to, “stephen, the sink has completely fallen!” I when to check and indeed the sink had completely fallen. well, there goes the rose parade. I had done some research, so I went about the business of remounting the sink. i emptied all the stuff from under the sink and disconnected all the plumbing and freed the sink.

i wondered if maybe the sink got bent in the process of falling. yep, on the long axis it got bent about 5/8 in. holding in the center and pulling up on one end, i got the bend down to 1/8 in. try as i may, i couldn’t get the 1/8 in bend out of the long axis. i didn’t expect any bend in the short axis but i checked anyway. it too had an 1/8 in bend. since there would be no good pivot point on the short axis, there would be no way to bend it back to true. with the bend in both directions of the sink, even after i got it remounted, it would be always pulling away from the bottom of the counter. inventually, the continued pressure of the bend could cause another gap. the sink was toast.another $300 later, i had secured the same model of the sink. i wasn’t going to be like the previous installer, so i went about finding fasteners to physically attach the sink to the bottom of the countertop. a little bit of internet search and i discovered my options and went about finding the clip. on news years day, the existence of those clips turned out to be far less than a dime a dozen. maybe i just checked the wrong source but by the ned of the day, i hadn’t found any clip.

so, at the end of day 1, i have a sink, a hole in my counter were i want the sink to be, no way to physically and properly attach it, with the hope i’ll find it the clips at a local plumbing supply store. in absence of that, i know of a source of clips but i’d like to avoid the hour and half round trip, especially since jimmy has also earned a trip to the vet today.

day 2: after a grand total of 9 trips to different stores, i had secured clips. Mary got home late, so we’ll reattach the sink tomorrow.